Description
BRAIN2 HD SPECIFICATIONS:
Size (width x length x height):
29,6 x 37,7 x 22,3 mm
Weight:
16,7 g
15 Connections:
9 Gold-plated servo type three pole JR/Futaba male connectors, with 11 signals connections configurable for:
9 output (7 PWM + TX for SYS + TX for on onboard USB), and/or 11 input (6 single PWM from RX, 1 RPM pulses + SAT1 +SAT2 + RX on SYS + RX on onboard USB) and 8 servo power bus connections
1 Power MPX connector controlled by a switch
1 Gold-plated servo type three pole male JR/Futaba connector for power switch
1 On board micro USB connector capable to power internally the Unit
1 SYS four poles JST-Z connector (GND, TX, RX, +V) capable to power internally the unit or an external accessory (Wireless Dongle)
1 On board micro USB connector capable to power internally the Unit
1 SYS four poles JST-Z connector (GND, TX, RX, +V) capable to power internally the unit or an external accessory (Wireless Dongle)
2 SAT three pole JST-Z connectors with 3,3V output (2 input and/or 2 output)
Serial input for every receiver Brand with very low latency method:
Spektrum: New bidirectional SRXL v2 (with telemetry) / Bidirectional SRXL (with telemetry) / Unidirectional SRXL / DSM2 22mS / DSM2 11mS / DSMX 11mS / PPM / Remote RX
Futaba: S.Bus2 (with telemetry) / S.Bus / PPM
Jeti: EX-BUS (with telemetry) / UDI / PPM+ / PPM-
Graupner: SUMD (with telemetry) / SUMO
Multiplex: SRXL-12 / SRXL-16 + MSB (with telemetry)
FrSky: S.Bus + Smart.Port (with telemetry) / F.Port (with telemetry) / F.Port2 (with telemetry) / F.Bus (with telemetry) / S.Bus
JR: X-Bus A (with telemetry) / X-Bus B / DMSS
Futaba: S.Bus2 (with telemetry) / S.Bus / PPM
Jeti: EX-BUS (with telemetry) / UDI / PPM+ / PPM-
Graupner: SUMD (with telemetry) / SUMO
Multiplex: SRXL-12 / SRXL-16 + MSB (with telemetry)
FrSky: S.Bus + Smart.Port (with telemetry) / F.Port (with telemetry) / F.Port2 (with telemetry) / F.Bus (with telemetry) / S.Bus
JR: X-Bus A (with telemetry) / X-Bus B / DMSS
Align: DMSS
Hitec: S.Bus
Hitec: S.Bus
RadioLink: S.Bus
TBS: Crossfire (with telemetry) / S.Bus / PPM
ELRS: Crossfire (with telemetry)
FlySky: i-Bus (with telemetry)
PowerBox P2Bus (with telemetry) / SRXL-16
Governor:
For Electric, Nitro, Gasser
Governor rotor speed control range: 800-6500 RPM
Governor rotor speed control range: 800-6500 RPM
Autorotation Bailout function (fast RPM recovery from a failed autorotation manoeuvre)
Telemetry input:
From ESC on electric models:
Castle Creation
Hobbywing
Hobbywing
Align
Scorpion
Scorpion
Kontronik
YGE
Spektrum
Spektrum
FrSky
OMP
OMP
ZTW
ZDFly
Graupner
ZDFly
Graupner
From Temperature sensors on Nitro / Gasser / Turbine models:
Jeti
Futaba
Futaba
From RPM Sensors:
All sensor brand
Possibility to monitor separately also the RPM of the tail motor
From Variometer (Altitude, Vertical Speed):
Jeti on SAT2 connector
FrSky, Futaba, Robbe, Graupner sensors on Bus
FrSky, Futaba, Robbe, Graupner sensors on Bus
Quality Of Signal (QOS) received:
For all receivers brand
Quality of Servo Voltage input:
For all kind of Power input: ESC BEC, external/separate BEC, Lipos/Li-Ion/Li-Fe/NiCd/NiMh, Backup Power Systems
Telemetry output:
Spektrum, Futaba, Jeti, Graupner, Multiplex, OpenTX, EdgeTX, Ethos, Crossfire, JR, PowerBoxSystem, FlySky
Power input:
Between 4,5V to 15V with one or two (redundant) lines from BEC or (2S minimum) Li-Po (7.4V) or Li-Ion (7.4V) or Li-Fe (6.6V) or 5/6/7 NiCd -NiMh
The direct current managed by the electronic switch located downstream of the MPX connector is 20A with short-term peaks up to 50A
Outputs:
7 Servos/ESC outputs. Of which 5 are fully programmable from 50 to 560Hz (also for cyclic control)
Auto Diagnosis at each power on:
With result by LED flashes
With result by initial Swashplate movements
Diagnostic logs:
More than 50 different parameters can be recorded during flights
Vibrations are also logged during flights
More than 50 different types of Events are monitored and automatically logged during flights
Already included “on board”:
Status LED
USB on board
Parameters setup / regulation:
Via apps in English, Deutsch, François, Russian, Chinese, Italian, Spanish (with the possibility to add, edit, share other languages):
Windows
MAC (with emulators)
Linux (with emulators)
Android
iOS
Via “Integrations” menu:
Spektrum
Jeti
Graupner
OpenTX
EdgeTX
Ethos
Crossfire (ELRS/TBS)
Via dedicated transmitters channels (dials):
In addition to the radio channel dedicated to tail gain, up to other three radio channels can be assigned to one of the 51 internal parameters of the unit
Swashplates:
90°
120°
135°
140°
4 servos
Tandem rotors (2+2 servos)
Tandem rotors (2+2 servos)
Mounting positions:
Up to 16 different possible mounting positions on the model
Included in the package:
1x Brain2 HD
1x Servo cable for serial RX connection
1x Cable red/black + plug MPX
1x Switch black + cable + plug
2x Double-sided adhesive
1x ‘Safety Notes’ leaflet
Please, after purchase, download for free the latest software from “Downloads“.
Updates can be handled for free automatically by the software after first installation.
Visit Release Notes under “HELP” menu of the BRAIN Software after each update.
Updates can be handled for free automatically by the software after first installation.
Visit Release Notes under “HELP” menu of the BRAIN Software after each update.
Summary
Author Rating
Aggregate Rating
2.5 based on votes
MSH Electronics S.r.l.
Product Name Brain2 HD
Price
EUR 215.00
Product Availability
Available in Stock
